Ways to Perform Pool Leak Detection

The tools of the trade when it comes to pool leak detection and repairs are wide and few, but they’re very accessible to everyone. Whilst working on a pool requires extensive knowledge, you still need these tools to make sure that your search has fruits into something useful.

  • Information Before Tools

Knowledge is the number one tool that can help you find the problems in your pool. Knowing how the pool flows, how the equipment works, how the plumbing runs and how you can check different routes for water loss can make things easier for you. Even with this, there are tools you can use to remove the guesswork altogether.

  • Dye Testing

The number one most popular technique when you’re doing pool leak detection is the dye method. It’s probably the most ancient of all the techniques, but it’s still around because it works. All you need is to turn the pump off, let the water stay still and use an entire syringe full of pure food colour.

Once you do so, stay underwater with goggles or mask and observe if the dye dissipates suddenly in one area. If a suspected leak sucks the dye out of the water, this is most likely a leak. You would want to test this in your skimmers and pool installations like pool lights and returns.

  • Pressure Testing

Another method to finding leaking points is to use a pressure test. This is typically done in conjunction with plugging the pipes that you believe are leaking. Once you have plugged both sides, with one side being the test plug, connect an air compressor that uses nitrogen or air.

Nitrogen is noisier when there are any leaks, together with the fact that it can seep through areas where water will take time to do so. A test kit can be bought anywhere, which contains an entire set of testing rigs, closed plugs, test plugs and other attachments. You would need to get a separate air compressor.

  • Sonic Testing

Finally, no pool leak detection is complete without the use of sonic test methods. Whilst the pressure test becomes a positive test for leaks, the sonic test tries to find where the leak is, so you do not need to remove the entire pipe system from the ground. What you need for this test are listening devices such as hydrophones and electronic listening devices that work through sound.

To know more, get in touch with pool leak detection Brisbane!